What's new

Home Arcade System

Hi,

Unfortunately the PSU you linked to is pretty terrible for arcade stuff, it's weak and can give video interference. Not recommended at all for PCB games, but it just might be enough for Pandora's Box.

For OSSC you can use the NESRGB Scart cable or a VGA cable with the right adapter for HAS (listed in the first post of this sales thread).
 
RGB said:
Hi,

Unfortunately the PSU you linked to is pretty terrible for arcade stuff, it's weak and can give video interference. Not recommended at all for PCB games, but it just might be enough for Pandora's Box.

For OSSC you can use the NESRGB Scart cable or a VGA cable with the right adapter for HAS (listed in the first post of this sales thread).
Click to expand...
Hey

Is the 8pin mini DIN to HD15 adapter PCB already installed on the HAS? I hope it does I have no idea how to solder.

Also could you point me to a PSU that's small enough to power the HAS?

Thanks
 
At arcadeforge they state the following:

This PSU works with MVS 1 Slot, 60-in-1, 19-in-1 and other multigame arcade PCB.

- PSU with 12V and 5V, 2A

Actual current specification for the NeoGeo MV-1FZ is 5V 7A

https://wiki.arcadeotaku.com/images/d/d9/MV-1FZ-Manual.pdf (last page)

Please people, STOP trying to run arcade hardware on subpar hardware.
 
Those Arcade Forge PSUs are terrible. Hook up a multimeter to the 5V and watch the voltage fluctuate between 4 and 7 volts. NO WAY I'd hook up any of my arcade boards to one of those.
 
@RGB maybe you should add a few PSUs in your main post. I've been using a happ 110w, available all over the place but here's the Happ link.
 
  • Like
Reactions: RGB
rtw said:
Actual current specification for the NeoGeo MV-1FZ is 5V 7A
Click to expand...
This is clearly a mistake in the manual. A 3A PSU is more than enough.
Still a valid point that a 2A rated PSU should be avoided.
 
Sorry, all HAS units as well as Sega Saturn controller adapters are on hold.
 
You must log in or register to reply here.
Back
Top