If you post over at the Mister discord or forum get ready to get banned lol, jk... but they are more console/pc centric over arcade stuff. I think if the project survives, we will eventually get better support for arcade boards, etc...it will just take time is all.Stupid side note... the 12v adjustment pot on the Namco Exceleena PSU's, doesn't live adjust the 12v like it does when you adjust the 5v pot. So i turn the 5v pot on the PSU and i watch the 5v line go up and down... i turn the other adjustor which is actually the 12v adjustment, it does nothing until you shut down the cab and start it again, and your 12v is lowered.... zzzzzzzzzz. At least i know now i guess. Back on topic now. Time to go bitch in the mister thread about things not being the same as my original PCB.
If you can, please try and support the devs working on arcade cores, etc...