Good Evening Everyone. I was curious if there is any interest in me making a batch of JAMMA extensions. I made a batch for myself and friend and will have a few extras to sell, but if there is a bigger interest, I'll consider making one large batch. This is Frank's JAMMA ext PCB he posted a few years ago but I made some additions that may be appealing to people: Integrated voltmeter on game board side and custom case I designed for both ends. These have been tested to work on JAMMA Switchers as well, which was my original intension. If I do make a batch, I can only ship to the lower 48 states. I'm just an end-user and international shipping has been a royal pain for me (sorry).
Also showing color combos for case prints. Thought it would be cool to make a theme so I did one in Capcom color that matches my Jasen CPS1 case.
Looking to ask for $70 each plus shipping.
Features:
- Gold JAMMA fingers
- Beveled edge (by hand cause JLC couldn't do it for such a small PCB and I did ask).
- Custom case. You can buy longer M3 screws if you want to use PCB feets on any of the corners.
- Integrated Voltmeter (Voltmeters tested to make sure they are within tolerance)
- 32" (80cm) long (big reason for the Voltmeter due to loss so you can adjust as necessary)
- Hand made IDC Cable (that length is typically not available for a reasonable price and the connectors are reversed)
UPDATE 5/13/24. All extras have been sold. Any further interest will be put on a list. Once I reach a Quantity interest of 10 or more, I will order another batch. I appreciate everyone's interest in this thus far.
UPDATE: 5/5/24. I have finished making all the cables and I have enough extras to cover those that want one. I'll reach out to you individually. If any others are interested, just reply to the thread your interest and how many. I'll continue to monitor it and see when I can push for another batch.
Also showing color combos for case prints. Thought it would be cool to make a theme so I did one in Capcom color that matches my Jasen CPS1 case.
Looking to ask for $70 each plus shipping.
Features:
- Gold JAMMA fingers
- Beveled edge (by hand cause JLC couldn't do it for such a small PCB and I did ask).
- Custom case. You can buy longer M3 screws if you want to use PCB feets on any of the corners.
- Integrated Voltmeter (Voltmeters tested to make sure they are within tolerance)
- 32" (80cm) long (big reason for the Voltmeter due to loss so you can adjust as necessary)
- Hand made IDC Cable (that length is typically not available for a reasonable price and the connectors are reversed)
UPDATE 5/13/24. All extras have been sold. Any further interest will be put on a list. Once I reach a Quantity interest of 10 or more, I will order another batch. I appreciate everyone's interest in this thus far.
UPDATE: 5/5/24. I have finished making all the cables and I have enough extras to cover those that want one. I'll reach out to you individually. If any others are interested, just reply to the thread your interest and how many. I'll continue to monitor it and see when I can push for another batch.
Attachments
Last edited: