What's new

Namco Exceleena 1 + 2 cabinets.

Does anyone know much about the little coin board in the cabinet? Mine’s been disconnected and wires cut to adapt to an Australian currency at some stage. I want to return it to its original setup and wondering what the logic of this thing is.
 
Mine stopped accepting coins at some point, and I suspect something on that little board gave out and caused the problem. Never got around to looking into it.

Following this subject with great interest. :)
 
kazuo said:
Mine stopped accepting coins at some point, and I suspect something on that little board gave out and caused the problem. Never got around to looking into it.

Following this subject with great interest. :)
Click to expand...
I might hit you up for some pics if that’s okay if I have any trouble setting mine up.
 
bartre said:
Has anyone ever had the metal bottom piece for the control panel on the Exceleena 2 repainted/powder coated?
I've got a guy that can do it for mine, but I want to be sure I get the color right.
any tips would be appreciated!
Click to expand...
Realized I never updated. Had a welder friend patch the hole and got both my lowers powdered.
Color is ever so slightly different, but I'm more than happy

20230428_170945.jpg
 
Nice job @bartre. Which bits do you mean “lowers”? I’m just curious as I’m restoring my EX1 as you know and always keen to see how other people do things. 😃
 
I'm referring to part 10 from the manual.
The 2s control panel piece just comes off rather than being on any kind of a hinge, and the tray attached to the cab has (i think) 8 screws that just hug it to the front of the machine.

1698420324769.png
 
Hey Exceleena owners. Is anyone running a Japanese coin mech in their machine. Like a an Asahi Seiko? If so would you mind posting a picture so I can see what parts I need to get one going? I have the mounting and coin mech but not sure about the switch and wiring side. Cheers.
 
Ziggy Cheetos Dust said:
Hey Exceleena owners. Is anyone running a Japanese coin mech in their machine. Like a an Asahi Seiko? If so would you mind posting a picture so I can see what parts I need to get one going? I have the mounting and coin mech but not sure about the switch and wiring side. Cheers.
Click to expand...
I now also have the mounting and coin mech, and I also am not sure about the switch and wiring side.

The factory coin mech is a Conlux N563-1, the Conlux N560 is a drop-in replacement - just need to source some more retaining pins.

I bought mine here (Aussie seller) despite being advertised as parts or repair it works perfectly. My one looks like it has never been used. Probably chucked all the Japanese mechs in storage when they converted them for Aussie currency and found the box 30 years later.
https://www.ebay.com/itm/295142034463

So yes, now I have the exact same problem, hoping that someone has a solution...

Empty mounting bracket
IMG_8608.png

Apparently brand new Conlux N560
IMG_8610.png

Coin mech in bracket
IMG_8609.png

Assume I'm missing something back here, must be a microswitch that ticks as the coin passes - not sure how that microswitch is retained or how it is attached to the harness.
IMG_8611.png

The manual talks about part #54 "Coin (B) PC Board 461-601" so its also the microswitch attaches to the Coin (B) PCB, and the harness attaches to that board?
 
Looks like the Coin (B) PC board provides the following

SW6 (coin credit) which is the microswitch in the coin mech
SW5 (service credit) service credit momentary-switch on the service panel (but on mine is weirdly wired up behind the coin door)
SW4 (test menu) which is the test menu slide-switch by the service panel

It also ticks over the 9v credit counter that should be fitted in the cab (mine is missing) and sends the coin count signal to JAMMA pin 8 (coin counter 1)

So the easy fix for my use case would be to use a switch like this
https://www.ozstick.com.au/product/microswitch-coin-mech/
Find some way to retain it on the back of the coin mech, and wire that to GND and JAMMA pin 16 (COIN1) and optional JAMMA pin 8 (COUNT1)

Update: this coin mech is the one I went for in the end
https://www.aliexpress.com/item/1005005262871807.html
 
Last edited:
Does anyone know where the vert yoke wires are to flip it 180 degrees?

Edit - I think it’s the blue/red pair but was just curious if anyone knew. This is on an Exceleena.
 
Last edited:
shmup-o said:
Does anyone know where the vert yoke wires are to flip it 180 degrees?

Edit - I think it’s the blue/red pair but was just curious if anyone knew. This is on an Exceleena.
Click to expand...
Usually Blue/Red is horizontal and white/brown is Vertical.

Horizontal yoke connector is also usually 8mm i believe, and the Vertical is 5mm...so smaller.
 
bagheera369 said:
Usually Blue/Red is horizontal and white/brown is Vertical.

Horizontal yoke connector is also usually 8mm i believe, and the Vertical is 5mm...so smaller.
Click to expand...
Yeah everything I read said the same thing but this was opposite, really weird. I did get it switched though and it wouldn’t degauss last night but I finally got it all up and running. Whew.
 
You must log in or register to reply here.
Back
Top