mR_CaESaR
Champion
Nice! I got my jst RA today haha
FS Xed and Mirko repro Monkeyball banana and harness
- Thread starter XeD
- Start date
For Sale
Those panels from @alberto1225 look amazing! Please add one to my stack Alberto 
Lemony Vengeance
Champion
I'm definitely in for the next order!
mR_CaESaR
Champion
Aren't you in for 4? 
Lemony Vengeance
Champion
absolutely.. I didn't want to say I AM the next order HAHAHA.
i got a panel made for my konami windy 2
Mirko
Enthusiast
Yes!
Yours is slightly different from the rest.
mR_CaESaR
Champion
I always thought the windys were the same as Sega
XeD
Grand Master
Their dimensions are just a tad off
I got my panel sorted out! Went with a DIY 3D printed handle, to save some money. It’s been working out awesome so far!
Can’t believe I can play this at home. What a time to be alive!!
Can’t believe I can play this at home. What a time to be alive!!
Mirko
Enthusiast
Right on, we’ll need to start a high score battle once everyone is up and running.
Mirko
Enthusiast
mR_CaESaR
Champion
Decided to order the parts for the Op Amp as it seems like a fun thing to build...
All that's left is the Monkey Ball panel from alberto and batch 2 of the bananas
Code:
PCB from Osh Park
1x LMC662CN/NOPB LMC662CN DIP8 (ordered 3 from mouser)
5x K104K15X7RF53H5 16V 0.1uF ceramic (ordered 20 from mouser)
2x FG18C0G1H470JNT00 16V 47pF ceramic (ordered 8 from mouser)
1x 860010372001 16V 10uF polarized electrolytic (ordered 10 from digikey)
2x TAP106K016SCS 16V 10uF polarized tantalum (ordered 10 from mouser)
2x 270-68-RC 68 5% 1/8W (ordered 200 from x-on)
2x 270-2.2K-RC 2.2K 5% 1/8W (ordered 200 from mouser)
2x 299-4.3K-RC 4.3K 5% 1/8W (ordered 200 from mouser)
2x 270-33K-RC 33K 5% 1/8W (ordered 200 from mouser)
4x 270-100K-RC 100K 5% 1/8W (ordered 200 from mouser)
x 1 B4P-SHF-1AA (ordered 10 from digikey)
x 1 B6P-SHF-1AA (ordered 10 from x-on)
Ground connector: (already have)
Analog connector: (already have)
Digital connector: (already have)
Ground pins: (already have)
Other pins: (already have)
4-Pin Analog connector: ordered 10 from x-on
6-Pin Analog connector: can't seem to find any in stock anywhere
Analog pins: (already have)
Start button quick disconnects: (already have)
22 Gauge Wire: already haveAll that's left is the Monkey Ball panel from alberto and batch 2 of the bananas
XeD
Grand Master
@mR_CaESaR if you can't find the 6 pin connector by the time batch 2 ship out I can add one to your order
Last edited:
mR_CaESaR
Champion
Thanks. I might take you up on that offer. But judging from when parts start to ship out, I probably won't be ready until late Jan early Feb at the earliest (eta for the 8 way TE Amp UP is late Feb).
XeD
Grand Master
My rough guess on batch 2 is 4 month from now.
A month for people to get batch 1, receive feedback and possibly do some tweaks to the design. 2 guys bug testing is nothing compare to 18 people.
A month for the pre-order
2 month (give or take a month) for manufacturing and delivery to me before I can ship out. People who order just banana will once again get their order out 1st as those are done in house
A month for people to get batch 1, receive feedback and possibly do some tweaks to the design. 2 guys bug testing is nothing compare to 18 people.
A month for the pre-order
2 month (give or take a month) for manufacturing and delivery to me before I can ship out. People who order just banana will once again get their order out 1st as those are done in house
mR_CaESaR
Champion
That's cool.. I think by the time batch 2 is ready, it should only be the banana that I will require..
In theory, I should still be able to play it with the Gundam mould.. Albeit very strange
In theory, I should still be able to play it with the Gundam mould.. Albeit very strange
nnap
Grand Master
You can remove the angled piece from to gundam stick. It will sit a bit low but definitively playable. Did that on my Afterburner Climax panel.
XeD
Grand Master
Just a random question. Anyone from batch 1 looking for a DE10 nana?