I downloaded this and compared the Alpha Mission 2 binaries that I used, zero difference. For the distorted graphics this will not resolve it.- Download Smoke's Pack: filefactory.com/file/66z898rc1…o%20Roll-Up%20BETA%201.7z
Hm, that is not how it is in your instructions PDF file. Or at least, not clear. Thus far I put everything in \update\xxx.yyy.Menu files are loaded from \games\menu on bootup but the part that goes into the flashes is updated from \update\menu
No there is no visual feedback as of now. Just wait 15 seconds.Back to the gfx issue: I put the menu update files in \update\menu\ and indeed, they are gone afterwards.
Is it correct that after the flash-update, the system goes to the "Hardware Test" page of the MVS-test menu? There is no visual feedback that flashing starts/ends?
Unfortunately, the static gfx issues remain the same.
I always test both. The MV-1B and MV-2F have both (still) the exact same pixel perfect gfx issue after the menu update (now 21012018 on SD and in flash). I stopped testing multiple SD-cards as my initial test showed it didn't make any difference (now using Kingston 8GB)No there is no visual feedback as of now. Just wait 15 seconds.
Gfx issues remain on which mobo?
Having exactly the same problem, got the same MB as you MV-1F (the JAMMA one without the headphone jack) I have now sent my setup to @deibit to get to the root of this problem, then we can get answers on this.Okay, so I prepped my 2 SD cards again with the cluster size of 64kb.
First the Samsung Evo +, 1st boot, went very well. All games in the list. Booted 3 games in 3 slots:
Flipshot
Blazing Star
Blues Journey
Played every game for about 1-2 levels or matches then switched. I did this 8 times in a row and worked perfectly! The fun ended when returning to menu. Okay fair enough as Mitsu said don't use it so I did a reboot. Nope, only a few games show up. Again reboot, no games found. Again reboot, only a few games again. Again reboot, hey my games are back in their slots! Hmm, let's select a game to play, button to select slots doesn't work, first gamw autoboots. Straight into exception handling.. okay enough of this card.
Next Sandisk ultra, no games found. Next boot, only 1,5 page of games. No success at all with this one while I did the exact same thing with both cards.
Just to be clear, I did a backup memory reset before switching cards using the dips on/off method.
Any other tips?
Is this with all 4-slot motherboards, or just certain models?As stated on the instructions. There are currently some problems with 4-slots and 6-slots.
I have a MV-1F though, the same one @LHantz is having issues with...From what you say, it looks like it's a menu problem with MV1FZ. We need to dig it further. We got a couple of MV1fZ coming to us to test this in parallel.
Okay great, I thought they were pretty different as a 1FZ half the size of a 1F (I've had both), but if you say they are similar then that would be a good place to start with.Yes, that's what I wanted to say, any MV-1F*