What's new
By:
Filters

A Freeware Taito TypeX Multigame

Sounds like you have corrupted your disk in some way ?
What do you mean by the "reset line" ?
 
rtw said:
Very strange, looks like no disk is connected at all !
Click to expand...
you are right . i removed the ssd and did the same . i removed sata cable from mb and connected back , connected back ssd and powered . now it works . lets check after the logs . ill be back with txt (i did "txtshell.txt." ) shortly
 
  • Like
Reactions: rtw
@rtw ... anyway, i was received 2 new messages . in the txt i didnt seen something to be logged . anyway , i did pictures to be sure (i know isnt relevant but just to show you) .

ps : nevermind ... "ttxshell.txt." doesnt register logs . i did " ttxshell " and now we have some logs . i will test again and hope we will get that messages from pictures attached here
 

Attachments

  • 8C4E02C4-51A6-4001-95AF-AF8DAA400275.jpeg
    8C4E02C4-51A6-4001-95AF-AF8DAA400275.jpeg
    140.9 KB · Views: 76
  • CA147D18-4D32-47AA-BE3A-511CDB5256F7.jpeg
    CA147D18-4D32-47AA-BE3A-511CDB5256F7.jpeg
    131.3 KB · Views: 67
Last edited:
@rtw i did " ttxshell " and now we have logs
 

Attachments

  • rtw - ttx1 tests.zip
    727 bytes · Views: 78
Thank you for the logs. Will take a look later today.

What is the error message being shown from ttxshell displayed in your last picture ?
 
rtw said:
Thank you for the logs. Will take a look later today.

What is the error message being shown from ttxshell displayed in your last picture ?
Click to expand...
“ error malformed return packet 0 x 00000f29 “ and the other is in jap text
 
The malformed packet is interesting. What kind of IO are you using ?

Have you seen the malformed packet error before ?

I checked all logs and there are no errors logged. Did you enable logging before or after you got the malformed packet error ?
 
rtw said:
The malformed packet is interesting. What kind of IO are you using ?

Have you seen the malformed packet error before ?

I checked all logs and there are no errors logged. Did you enable logging :D or after you got the malformed packet error ?
Click to expand...
Logged was before after i figure it out the making txt file ive tried first “ ttxshell.txt. “ and then ive seen nothing in this and ive made “ ttxshell “ txt file and keept both and boot to see if something and where is logs writed and in “ ttxshell.txt. “ was nothing , but in “ ttxshell” txt was the logs . So … all logs are new from after ive figure it out .

Im using the chinesse IO because is handy and much near to my hands than taito io who i keep in the closet :D

That was the first time ive received that message “malfunction … “
 
Thank you for the information. The error means that your Chinese IO replied with a very strange size of a JVS packet. I might add some debug info to that later.

If you have a TAITO IO why don't you use that instead ?
 
If it'll help, I'm happy to translate the Japanese error message. Just need a clearer image of the error window.
 
Can't quite make out some of the kanji in the photo, but I believe it's saying it can't read from some of the memory addresses listed. Program has. shut down, click on to exit

Dunno if that helps or not
 
rtw said:
If you have a TAITO IO why don't you use that instead ?
Click to expand...
Tested little bit this morning with K91X1025F - TAITO IO :happy:
 

Attachments

  • rtw - TTX1 Multi with original Taito IO.zip
    927 bytes · Views: 101
rtw said:
@AlxUnderBase thanks for the second log, I cannot see any errors but I see your TAITO JVS :)
Click to expand...
yes , tbh … for me chinesse io is good too, ive seen how its working and is good too .

Anyway ive received with taito jvs io few times onky that message “error no entity …. “ but hit ok and enter in game (this happened rarely only before loading chaos breaker , on tetris everytime i load is fine)
 
You must log in or register to reply here.
Back
Top