AlxUnderBase
Enlightened
Seems this BIOS version is the winner to make the TGM3 to work bros, is the same as on @rtw 's gpu . Thanks for your effortI'm struggling to get a clear photo on my PVM but my GPU BIOS is:
BK-ATI VER008.017D.032.000
Seems this BIOS version is the winner to make the TGM3 to work bros, is the same as on @rtw 's gpu . Thanks for your effortI'm struggling to get a clear photo on my PVM but my GPU BIOS is:
BK-ATI VER008.017D.032.000


❤❤❤See DOS boot up and feel nostalgic
Im almost ready . Hope tomorrow to find a proper way to test itCredits go to: @Niko for his DOS boot image
- Write image to disk
- Insert original PS2 keyboard
- Connect VGA screen
- See DOS boot up and feel nostalgic
- cd TTX1GPU
info:
flashrom -i
save:
flashrom -s 0 original.bin
write:
flashrom -p 0 9600SE.BIN
Please save your original BIOS and share it with us before flashing @AlxUnderBase !
https://we.tl/t-tsACLh9B4q
I am not responsible for any damage this might incur to your system. This is done at your own risk.
I dont know if i did something wrong or i missed somethingUpdated with a warning about the watchdog.
https://www.arcade-projects.com/threads/a-freeware-taito-typex-multigame.5926/post-320513
@rtw : all went great with some nice sounds from MS Dos after flashing the bios . Now all games working amazing@AlxUnderBase Nice to see you have it working somewhat. You should redo the operation with the command:
flashrom -f -p 0 9600SE.BIN
Then when that is done reboot and save the image to verify that it is the same as 9600SE.BIN.
flashrom -s 0 original.bin
And post it here. Just zip it up and attach it to the post, it is tiny.
What do you mean ?HDD image no longer available?![]()

I read the entire thread but nothing. I can't find it, I only find the software that is copied to the TTX system OS but I can't find an image (.img) of the TTX OS, so what I am looking for is something similar to what Niko has (an OS image) . I do not have any original image of the OS since the hard drive that came with the TTX is totally deadLooks like you are missing a PSU unit as well
Everything is there, read the instructions carefully...![]()