Thanks boss. Nail polish remover was the remedy (AKA: 100% pure acetone). Sold near the nail polish at Walmart. It's about $3.50 for a small bottle.
FS Egret 2/Windy 2/NNC/Q25 (Repair refund)
- Thread starter XeD
- Start date
For Sale
Surprise, you don't actually need any keys to pull part a Madonna, which is nice. Didn't have to wait for the lock pick from China.
I'm really liking the look of these cabs. I was initially thinking I might just sell the three to get some funds to work on the MAS cabs, but I'm having second thoughts.
Not to say that these would have been an easy sell. Here's what I was greeted with when opening the CP enclosure:
The actual CP is surprisingly nice. Shame that some dolt had to punch a fourth button hole in the panel.
I'm really liking the look of these cabs. I was initially thinking I might just sell the three to get some funds to work on the MAS cabs, but I'm having second thoughts.
Not to say that these would have been an easy sell. Here's what I was greeted with when opening the CP enclosure:
The actual CP is surprisingly nice. Shame that some dolt had to punch a fourth button hole in the panel.
Hedonism Bot 2.0
Grand Master
Working on trying to get caps for this psu, and navigating digikey is cumbersome. If anyone makes a shareable parts list in the meantime, let me know. I've only used pre-made kits before, so this is new territory to me.
Also, has anyone else from East Coast gotten their cabinets yet?
Also, has anyone else from East Coast gotten their cabinets yet?
can someone tell me what locks and keys are original to windy2 and egret2
Taito still sells the E2/3/Vewlix locks brand new at 5200JPY for a set of 5. Key is another 9 or 10 bucks.
Cereth
Legendary
I want to say N5000 for the Windy II.
ok I can get those just need a key
@Hatsune Mike, in case you need a local source when you make your PCB. I swooped these up from Anchor Electronics here in San Jose for $1 a bag. They had the 13-postion connector (2pcs/bag) for the Egret II PSU but not the 3 position connector. The 3 position connector's spacing is exactly twice the spacing on the 13-pos connector, so I think I will just pull pins and hack up one of the connectors for the 3 position connector. They have the right angle versions too. Also, swooped up the 6-position JST connector for 15khz connection on the NNC.
Also, HSC Electronics closed up for good this past Saturday.
Hedonism Bot 2.0
Grand Master
I hope all goes well for the East Coast this weekend.
https://weather.com/storms/winter/news/2019-01-14-snowstorm-forecast-18-20jan-midwest-northeast
What are some good tips for storing cabs in freezing temps?
https://weather.com/storms/winter/news/2019-01-14-snowstorm-forecast-18-20jan-midwest-northeast
What are some good tips for storing cabs in freezing temps?
be proud boys and girls I did my first recap on blast sound amp and replaced fan.
Cereth
Legendary
I'm curious too. Also, we just got hit by more snow but not as bad. Stuff should still go out ok
kevindg86
Student
Well according to the tracking, my stuff from you should be going out on Friday. Guess I'll just have to wait and see...
i found a key on yaj
PascalP
Legendary
Here is a dude selling some Egret 2 PSU’s for those that might need one;
https://forum.arcadeotaku.com/viewtopic.php?f=35&t=39283
https://forum.arcadeotaku.com/viewtopic.php?f=35&t=39283
brad808
Professional
Yes sir you will need basic inductance meter. such an LCR meter. "L" being inductance... just because 
. Henry is your unit "H"
. Henry is your unit "H"
ReplicaX
Grand Master
Do you have a LCR meter?
On a lot of yokes:
Red and Blue = Hori Coil
Green and Yellow - Vert Coil