What's new
By:

The Definitive Guide to CPS2 Conversions

Hi.
Thanks for the great guide.
i'm in a quite bit difficult...
Could someone guide me converting a puzz loop2 into an eco fighters?
Here is the romlist of ecofghtr
YaMJYAsh.jpg

Do i need also the infinikey?
Or it exist a decrypted romset for it too?
Thanks
:)
 
Last edited:
Bonky said:
Decrypted set : http://cps2.avalaunch.net/

Romset ready for 27c322 ep-rom (need prg rom of your choice (ep-rom 27c4096) ) : https://mega.nz/file/AXdCnCSL#7BXywg_MtaUT7KZh5yKRV1v_Gug7bVNmJNfjgwXMKok
Click to expand...
Thanks mate.
Just the last questions.
So i will need 27c4096 for the
uec.01
ueced.03
ueced.04
ueced.05
ueced.06
and the 27c322 for everything else
uec.1112m
uec.1114m
uec.1116m
uec.1118m
uec.1120m
Do i need to burn qsound.bin too? (if so i need to put it in ROM1 with 27C010??)
That's all?
No pal to be burned?

Thanks :)
 
UEC.01 is 27c010

ueced.03
ueced.04
ueced.05
ueced.06 are 27c4096

uec.1112m
uec.1314m
uec.1516m
uec.1718m
uec.1920m are 27c322

use jumpers config same as progear and use a PAL G

Qsound.bin is just used for mame.

If you have pzloop2 with simms normally jumpers and pal are good
 
Bonky said:
UEC.01 is 27c010

ueced.03
ueced.04
ueced.05
ueced.06 are 27c4096

uec.1112m
uec.1314m
uec.1516m
uec.1718m
uec.1920m are 27c322

use jumpers config same as progear and use a PAL G

Qsound.bin is just used for mame.
Click to expand...
Thanks mate.
Last question.
PAL G...if i don't have in the Puzz Loop 2 B board, could be bought somewhere (or i can just buy a GAL16V8 and burn it (but in that case, burn it with which data??))?
Sorry for this very noob questions....but i'm not very familiar with CPS2...(as you can clearly see :D )
 
I have all the original rom chips for Sf zero and the infinikey associated with it. It is the hispanic version. Would this set be compatible with other region B boards?
 
kinooshi823 said:
I have all the original rom chips for Sf zero and the infinikey associated with it. It is the hispanic version. Would this set be compatible with other region B boards?
Click to expand...
If you kept the PAL3 as well and set the jumpers on the new board, then it should be fine.
 
Hey dudes !
Looking to convert some games here, but i can't find a link to download the roms and then apply the converted roms (For this, i have the link)
Anyone can help?
 
Enskynet said:
Hey dudes !
Looking to convert some games here, but i can't find a link to download the roms and then apply the converted roms (For this, i have the link)
Anyone can help?
Click to expand...
Many times you would use the ROMs directly from MAME, except for ones like Progear where people have published a combined ROM set.

If you don't plan on a key injection solution i.e. infinikey, use decrypted program roms like the Avalaunch set for the applicable roms.
 
@skate323k137 I used the decrypted avalaunch set for many games to revive them but, i'm in trouble with one of them.
I have a MSH vs Street fighter Hipanic (Orange) board.
Tried with the Avalaunch set but it boot up in a Solid green screen. Any idea?
Thank you !
 
Enskynet said:
@skate323k137 I used the decrypted avalaunch set for many games to revive them but, i'm in trouble with one of them.
I have a MSH vs Street fighter Hipanic (Orange) board.
Tried with the Avalaunch set but it boot up in a Solid green screen. Any idea?
Thank you !
Click to expand...
I am not positive right away; have you a Suicide tester ROM?
 
You must log in or register to reply here.
Back
Top