gts072
Beginner
Home Arcade System
- Thread starter RGB
- Start date
Bad_Hambre
Enthusiast
I got in!
gts072
Beginner
I love the HAS Supergun, especially the form factor. I own 2 other superguns and prefer Mike’s the most. The only thing I would like to see is a JAMMA extender. I have one but it’s very bulky.
Oh he makes that too though they’re out of stock and there’s no ETA. But if you’re patient - https://www.arcade-projects.com/threads/fs-jamma-extension-harness.12191/
I write to @rgb…and he says:
« You could use a 2-pin IDE ribbon cable extender between the 3P4P and the CPS2 3/4 player harness. »
Wookie
Beginner
Bigblue709
Enthusiast
9999 Damage
Grand Master
Sorry if this has been covered to death in the last 191 pages, but… does the audio attenuation mean the HAS is safe to use with gcompsw/gscartsw? IIRC superg indicated that the main issue with superguns has been amplified audio exceeding any reasonable levels that gcompsw or gscartsw could handle.
Edit: Never mind, found some discussion about it in this thread. tl;dr:
Last edited:
DJtheGamer
New User
Joko3
Legendary
Pre-order was submitted for a HAS last week. I decided I'm going to use one of these to test everyone's boards before shipping them out : )
Now I have to start paying attention to my email for the first time in years so I don't miss the email when it's time to order lol.
Now I have to start paying attention to my email for the first time in years so I don't miss the email when it's time to order lol.
@DJtheGamer - Not at all, the pre-order is still open 
I plan to message everyone from the pre-order list by the end of this week, so please check your spam folder if you don't get it by Friday.
Hey, that's awesome!
I plan to message everyone from the pre-order list by the end of this week, so please check your spam folder if you don't get it by Friday.
Joko3
Legendary
Joko3
Legendary
Got the mail last night and responded this morning. Ready for some HAS in my life!
9999 Damage
Grand Master
Custom cables worked great with the printmaker PSU covers. Easy to swap PSUs and superguns now.
What’s everyone using for A/V out? I got a Retro Access XRGB SCART cable, but it would be nice also to have a component option since almost everything else I have is component.
Edit: Read through the thread history a bit more. Sounds like the HAS supports RGB, so SCART and BNC will work without hassle, but I would need an RGB to YPbPr converter for component. I’ll just stick with SCART, then.
What’s everyone using for A/V out? I got a Retro Access XRGB SCART cable, but it would be nice also to have a component option since almost everything else I have is component.
Edit: Read through the thread history a bit more. Sounds like the HAS supports RGB, so SCART and BNC will work without hassle, but I would need an RGB to YPbPr converter for component. I’ll just stick with SCART, then.
Last edited:
DJtheGamer
New User
Yes! Thank you!@DJtheGamer - Not at all, the pre-order is still open
Hey, that's awesome!
I plan to message everyone from the pre-order list by the end of this week, so please check your spam folder if you don't get it by Friday.
9999 Damage
Grand Master
RNSpeed
Beginner
Posting up positive A+ no shill feedback for this device after using it as my main Supergun for some time now.
I have it hooked up to a Meanwell RT-85A as@PascalP @kikaso recommend and that seems to work really well with every board/multi I’ve thrown at it. The supplied power cables forks were a little too big for the MW PSU terminals but I just squished them with some pliers. No biggie. Just throwing it out there in case smaller forks can be supplied for Meanwell users on request?
The 3P/4P adapter and cables from @RGB
are superb quality but so far I’ve just used the CPS-2 one with AvP and it works great. Still gotta get to Konami and CPS-1. The snap in of the cable is so satisfying!
It’s definitely got my co-sign as best Supergun on the market. I can finalky understand what all you guys were yapping about now The Axunworks JJ-CBOX will still get used for JVS stuff, but the HAS is now my JAMMA gun of choice.
The quality is really fantastic and features/install/instructions are very well thought out. I haven’t even explored the button mapping stuff yet because the Undamned adapters and everything else are mapped perfectly out the box.
The C-Sync regeneration feature recently helped me out with a troublesome board. Another point of difference from competing devices.
P.S. I need to get one of your extension cables when they come back in stock @RGB as the stack with the 3P/4P adapter and plexi covers is pretty heavy and weighs down when using fat stacks like the CPS-1 Multi. I have one or the A-P extensions cables Frank_fjs made me but it seems to loose a lot of voltage by the time it reaches the board.
I have it hooked up to a Meanwell RT-85A as
The 3P/4P adapter and cables from @RGB
are superb quality but so far I’ve just used the CPS-2 one with AvP and it works great. Still gotta get to Konami and CPS-1. The snap in of the cable is so satisfying!
It’s definitely got my co-sign as best Supergun on the market. I can finalky understand what all you guys were yapping about now
The Axunworks JJ-CBOX will still get used for JVS stuff, but the HAS is now my JAMMA gun of choice.The quality is really fantastic and features/install/instructions are very well thought out. I haven’t even explored the button mapping stuff yet because the Undamned adapters and everything else are mapped perfectly out the box.
The C-Sync regeneration feature recently helped me out with a troublesome board. Another point of difference from competing devices.
P.S. I need to get one of your extension cables when they come back in stock @RGB as the stack with the 3P/4P adapter and plexi covers is pretty heavy and weighs down when using fat stacks like the CPS-1 Multi. I have one or the A-P extensions cables Frank_fjs made me but it seems to loose a lot of voltage by the time it reaches the board.
Last edited:
PascalP
Legendary
